|
|
|
|
1/4 X 1-1/2 INCH FLAT HEAD SPLIT DRIVE ANCHORS
The Split Drive Anchor is a one piece carbon steel for light-duty anchoring to all masonry
Central Steel Price:
$0.65
Item Number:
3FHSD14112
Order quantities in the range below to receive Discount(s):
| Quantity | Amount |
| 10 to 24 | $0.46 |
| 25 to 49 | $0.33 |
| 50 to 99 | $0.20 |
| 100 or more | $0.13 |
|
|
|
- Easy to install! A drill and hammer are the only tools needed to install split drives.
- Relatively high pull-out strength at a low cost
- Works in poured concrete, concrete block, brick and stone
- Drill same hole diameter as the anchor diameter
- Zinc plated for corrosion resistance
- Meets ASTM B-633
- Pull Out @ 1-1/8" Embedment (3700 psi concrete): 2000 lbs.
- Drill Size: 1/4"
|
|
INSTALLATION PROCEDURE:
|
 |
A safety factor of 4:1, or 25% of ultimate, should be used.
Critical applications (vibratory loads, overhead installations, etc.)
may require a safety factor of as much as 10:1 or more. |
|
|
|
|